E-LIB Suche - Ergebnisse für: Ortona, Alberto

1

High‐strength Si–SiC lattices prepared by powder bed fusion..:

Pelanconi, Marco ; Bottacin, Samuele ; Bianchi, Giovanni...
Journal of the American Ceramic Society. 107 (2024) 7 - p. 4436-4450 , 2024

Link: https://doi.org/10.1111/..

2

Design, Additive Manufacturing, and Electromagnetic Charact..:

Rosa, Alice ; Poretti, Samuel ; Milan, Giacomo.
Advanced Engineering Materials. , 2024

Link: https://doi.org/10.1002/..

3

The preparation of SiC reticulated porous ceramics with enh..:

Wu, Zhe ; Liang, Xiong ; Li, Yawei...
Journal of the European Ceramic Society. 44 (2024) 14 - p. 116675 , 2024

Link: https://doi.org/10.1016/..

4

Macroporous polymer-derived ceramics produced by standard a..:

Zambotti, Andrea ; Kulkarni, Apoorv ; Semerci, Tugce...
Open Ceramics. 18 (2024) - p. 100603 , 2024

Link: https://doi.org/10.1016/..

5

Si-SiC oxidation barrier coating on 3D printed Si-SiC strut..:

Bianchi, Giovanni ; Di Mauro, Antonio ; Ferrari, Luca..
Journal of the European Ceramic Society. 43 (2023) 5 - p. 1790-1796 , 2023

Link: https://doi.org/10.1016/..

6

Dynamic modeling, simulation and optimization of the partia..:

Pantoleontos, Grigorios ; Vlachos, Nickolas D. ; Lorentzou, Souzana...
Chemical Engineering Journal Advances. 16 (2023) - p. 100539 , 2023

Link: https://doi.org/10.1016/..

7

Using zeolite filters to reduce activated carbon use in mic..:

Cuomo, Maurizio ; König, Roger ; Zanardini, Elisabetta...
Journal of Water Process Engineering. 56 (2023) - p. 104298 , 2023

Link: https://doi.org/10.1016/..

8

Liquid metal infiltration of silicon based alloys into poro..:

Naikade, Manoj ; Hain, Caroline ; Kastelik, Kaja...
Journal of the European Ceramic Society. 43 (2023) 1 - p. 47-53 , 2023

Link: https://doi.org/10.1016/..

9

New, 3D binder-jetted carbons with minimal periodic surface..:

Pelanconi, Marco ; Blyweert, Pauline ; Bianchi, Giovanni...
Carbon. 213 (2023) - p. 118252 , 2023

Link: https://doi.org/10.1016/..

10

Ceramics:

, In: Springer Handbook of Additive Manufacturing; Springer Handbooks,

Pelanconi, Marco ; Bianchi, Giovanni ; Santoliquido, Oscar... - p. 597-625 , 2023

Link: https://doi.org/10.1007/..

11

A preliminary investigation of gyroids made of W-Cu composi..:

Viganò, Davide ; Balzarotti, Riccardo ; Santoliquido, Oscar...
Materials & Design. 234 (2023) - p. 112361 , 2023

Link: https://doi.org/10.1016/..

12

Powder bed fusion of polyamide powders combined with differ..:

Pelanconi, Marco ; Bottacin, Samuele ; Colombo, Paolo.
Journal of the European Ceramic Society. 43 (2023) 14 - p. 5871-5881 , 2023

Link: https://doi.org/10.1016/..

13

Conceptual design of an innovative gas–gas ceramic compact ..:

Zavattoni, Simone A. ; Cornolti, Luca ; Puragliesi, Riccardo...
Heat and Mass Transfer. , 2022

Link: https://doi.org/10.1007/..

14

Liquid metal infiltration of silicon based alloys into poro..:

Naikade, Manoj ; Hain, Caroline ; Kastelik, Kaja...
Journal of the European Ceramic Society. 42 (2022) 5 - p. 1984-1994 , 2022

Link: https://doi.org/10.1016/..

15

Liquid metal infiltration of silicon based alloys into poro..:

Naikade, Manoj ; Ortona, Alberto ; Graule, Thomas.
Journal of the European Ceramic Society. 42 (2022) 5 - p. 1971-1983 , 2022

Link: https://doi.org/10.1016/..