He, Feiyang ; Xu, Chenyan ; Khan, Muhammad He F, Xu C, Khan M. (2023) Tribological characterisation and modelling for the fused deposition modelling of polymeric structures under lubrication conditions. Polymers, Volume 15, Issue 20, October 2023, Article number 4112.
,
2023
Chan, Ka Po ; He, Feiyang ; Atwah, Ayat Adnan. Chan KP, He F, Atwah AA, Khan M. (2023) Experimental investigation of self-cleaning behaviour of 3D-printed textile fabrics with various printing parameters, Polymer Testing, Volume 119, February 2023, Article number 107941.
,
2023
Francese, Arturo ; Khan, Muhammad ; He, Feiyang Francese A, Khan M, He F. (2023) Role of dynamic response in inclined transverse crack inspection for 3D-printed polymeric beam with metal stiffener. Materials, Volume 16, Issue 8, April 2023, Article number 3095.
,
2023
He, Feiyang ; Ning, Haoran ; Khan, Muhammad He F, Ning H, Khan M. (2023) Effect of 3D printing process parameters on damping characteristic of cantilever beams fabricated using material extrusion. Polymers, Volume 15, Issue 2, January 2023, Article number 257.
,
2023
Almutairi, Mohammed Dukhi ; Mascarenhas, Taheer A ; Alnahdi, Sultan Saleh.. Almutairi MD, Mascarenhas TA, Alnahdi SS, He F & Khan MA (2023) Modal response of hybrid raster orientation on material extrusion printed acrylonitrile butadiene styrene and polyethylene terephthalate glycol under thermo-mechanical loads, Polymer Testing, Volume 120, March 2023, Article number 107953.
,
2023
Almutairi, Mohammed Dukhi ; He, Feiyang ; Alshammari, Yousef Lafi.. Almutairi MD, He F, Alshammari YL, et al., (2023) Analysis of the self-healing capability of thermoplastic elastomer capsules in a polymeric beam structure based on strain energy release behaviour during crack growth. Polymers, Volume 15, Issue 16, August 2023, Article number 3384.
,
2023
Yang, Zhichao ; He, Feiyang ; Khan, Muhammad Yang Z, He F, Khan M. (2023) An empirical torsional spring model for the inclined crack in a 3D-printed acrylonitrile butadiene styrene (ABS) cantilever beam, Polymers, Volume 15, Issue 3, January 2023, Article number 496.
,
2023
He, Feiyang ; Alshammari, Yousef Lafi A ; Khan, Muhammad He F, Alshammari YLA, Khan M. (2021) The effect of printing parameters on crack growth rate of FDM ABS cantilever beam under thermo-mechanical loads. Procedia Structural Integrity, Volume 34, 2021, pp. 59-64.
,
2022
